The Report of the Motions Committee addresses one Fall 2018 NFPA Standard with a certified amending motion that may be presented at the NFPA Technical Meeting (Tech Session) in San Antonio, TX on June 17-20, 2019: NFPA 801, Standard for Fire Protection for Facilities Handling Radioactive Materials This report also identifies a list of 29 standards that have been determined by the Motions Committee to be Consent Standards and shall be forwarded to the Standards Council for balloting. In accordance with 1.6.2(a) of the Regulations, a fifteen day appeal period follows the publication date of this Report in which one may file an appeal related to the issuance of the Consent Standards listed below. The filing deadline for such appeal is October 27, 2018
These Consent Standards are as follows:
NFPA 14, Standard for the Installation of Standpipe and Hose Systems NFPA 45, Standard on Fire Protection for Laboratories Using Chemicals NFPA 52, Vehicular Natural Gas Fuel Systems Code NFPA 59A, Standard for the Production, Storage, and Handling of Liquefied Natural Gas (LNG) NFPA 67, Guide on Explosion Protection for Gaseous Mixtures in Pipe Systems NFPA 69, Standard on Explosion Prevention Systems NFPA 70B, Recommended Practice for Electrical Equipment Maintenance NFPA 82, Standard on Incinerators and Waste and Linen Handling Systems and Equipment NFPA 85, Boiler and Combustion Systems Hazards Code NFPA 253, Standard Method of Test for Critical Radiant Flux of Floor Covering Systems Using a Radiant Heat Energy Source NFPA 262, Standard Method of Test for Flame Travel and Smoke of Wires and Cables for Use in Air-Handling Spaces NFPA 265, Standard Methods of Fire Tests for Evaluating Room Fire Growth Contribution of Textile or Expanded Vinyl Wall Coverings on Full Height Panels and Walls NFPA 276, Standard Method of Fire Test for Determining the Heat Release Rate of Roofing Assemblies with Combustible Above-Deck Roofing Components NFPA 285, Standard Fire Test Method for Evaluation of Fire Propagation Characteristics of Exterior Non-Load-Bearing Wall Assemblies Containing Combustible Components NFPA 286, Standard Methods of Fire Tests for Evaluating Contribution of Wall and Ceiling Interior Finish to Room Fire Growth NFPA 350, Guide for Safe Confined Space Entry and Work NFPA 402, Guide for Aircraft Rescue and Fire-Fighting Operations NFPA 701, Standard Methods of Fire Tests for Flame Propagation of Textiles and Films NFPA 914, Code for Fire Protection of Historic Structures NFPA 1003, Standard for Airport Fire Fighter Professional Qualifications NFPA 1005, Standard for Professional Qualifications for Marine Fire Fighting for Land-Based Fire Fighters NFPA 1041, Standard for Fire Service Instructor Professional Qualifications NFPA 1091, Standard for Traffic Control Incident Management Professional Qualifications NFPA 1402, Guide to Building Fire Service Training Centers NFPA 1600®, Standard on Disaster/Emergency Management and Business Continuity/Continuity of Operations Programs NFPA 1963, Standard for Fire Hose Connections NFPA 1975, Standard on Emergency Services Work Clothing Elements NFPA 2400, Standard for Small Unmanned Aircraft Systems (sUAS) Used for Public Safety Operations
The anticipated issuance date for these Consent Standards is November 5, 2018 with an effective date of November 25, 2018.
In addition, the following four Standards had previously been designated as Consent Standards and issued by the Council:
NFPA 16, Standard for the Installation of Foam-Water Sprinkler and Foam-Water Spray Systems, issued on May 5, 2018 NFPA 211, Standard for Chimneys, Fireplaces, Vents, and Solid Fuel-Burning Appliances, issued on July 26, 2018 NFPA 551, Guide for the Evaluation of Fire Risk Assessments, issued on March 15, 2018 NFPA 1965, Standard for Fire Hose Appliances, withdrawn on September 2, 2018