• Can I use 20 AWG multiple conductor cable in a raceway for control/signal circuits?

    I have a light tower and emergency stop button mounted 50 ft from the system enclosure.  The current for the light tower is 300mA at 24VDC.  I want to use a 20 AWG multiple conductor cable in a raceway to co...
    kkelly
    last modified by kkelly
  • Does a 24VDC enclosure light circuit need dedicated circuit protrection?

    There is a 24VDC LED light bar and a door switch in my enclosure which turns the light on/off depending if the door is open or closed respectively.  My question is does the light need its own ...
    kkelly
    last modified by kkelly
  • Hazard Evaluation NEC Dust Area

    Hi, I'm looking for a certified company who could make me a hazard evaluation for a silo area, and manufacturing area too for the cornmeal factory. Could you recommend me one, please? 
    erasmo.salima
    last modified by erasmo.salima
  • NFPA 101 - Emergency lighting

    NFPA 101 requests 10.8 Lux for emergency lighting. I am just wondering if this applies to large open space too ? if we have 50m2 open plan office, do I still need to achieve the 10.8 lux or a lower lux level is requir...
    mohamed.ehtiawesh
    last modified by mohamed.ehtiawesh
  • Year of origin and code language for dedicated microwave circuit

    Could you provide me with the code year, section, and language that first required a dedicated circuit for a microwave oven in a residential setting? My library of NFPA-70 does not go back that far. Thanks, R. Clem ...
    clem
    last modified by clem
  • Intrinsically Safe Listing for Zone 21

    I am looking at a portable hand-held instrument for use in a Class I, Div. 2, Group B,C,D (Zone 1) and Class II, Div. 1, Groups F,G (Zone 21) area. The instrument I am looking at has the following listing. I am able t...
    kgrohs
    last modified by kgrohs
  • Outlets in Lockers

    Is it permissible to provide NEMA 5-15R or NEMA 5-20R outlets in lockers that can be locked by the user? If so or if not, can you cite the articles in NFPA 70 to support your statement?
    jerryvtill
    last modified by jerryvtill
  • Machinery electrical enclosure clearances

    We had some machinery installed by the OEM. The safety control enclosure is installed under the machine with a 5' head clearance. Also you have duck under frame work and then lean over a large vacuum pump and then the...
    ron.olthoff
    last modified by ron.olthoff
  • Article 501 Cables Capable of Transmitting Gas

    I've asked the question before about 501(E)(1) & 501(E)(3) and if seals are required for cables terminated in non-explosionproof enclosures in a Class 1 Division 2 area and if they transition from Class ...
    william_pierce
    last modified by william_pierce
  • Pathway Survivability Level 1, Level 0

    I posted something similar in another forum.  But I know we have some fire guys here, so that is why I'm reposting.    I'm not a fire guy, so that is why I'm asking.   Question 1:  As...
    chiefns830
    created by chiefns830
  • emergency lighting

    Do I need emergency lighting installed with my temporary lighting stringers?
    jimmy.bias
    last modified by jimmy.bias
  • Inspection Windows for IR Testing

    At a job location we recently had a conversation on providing viewing / inspection windows on our transformers at a facility,  the client has a great PM plan is place for all the electrical equipment. Test , clea...
    rmheiland
    last modified by rmheiland
  • NFPA 70E Annex D

    Hi.   For arc flash calculations in equation D.4.2 Arching current, bolted three-phase available short-circuit current (symmetrical rms), is used. Can anyone tell me the definition of "bolted three-phase a...
    rene.immerkaer
    last modified by rene.immerkaer
  • 430.32(B)?

    430.32(B). What is a automatically started motor and what is a non automatically started motor? 
    charlesvanmeter
    last modified by charlesvanmeter
  • powder paint dust collectors

    How often should I have my explosion proof dust collectors inspected for the powder paint booths   Sammy Clayton Enviromental and Safety Administrator Newton Instrument Company 111 East "A" Street Butner, NC...
    sammyc
    last modified by sammyc
  • NFPA 70 690.12 RSD and Ground Mounts

    Hello, My organization is troubled by a recent question raised about the Rapid Shutdown Requirements of a Ground mount system which has AC conductors entering a building for interconnection.   In NH the guidance...
    norwichsolar
    last modified by norwichsolar
  • NFPA-13

    HI, I want to learn about NFPA-13 just about design of sprinkler system. plez help me
    abrar.b
    last modified by abrar.b
  • Question concerning HRC1/2 PPE

    Looking to replace our current arc flash equipment and I am wondering if long coats (lab coats) and leggings are a viable replacement to the coveralls in a HRC1 or HRC2 environment.  
    jeff.mundy
    created by jeff.mundy
  • Aspirin for Coronavirus?

    NOTE:  THIS IS NOT MEDICAL ADVICE, ALWAYS CHECK WITH YOUR DOCTOR   I've been researching this... One baby aspirin per day may help against coronavirus, and other viruses that mess with the lungs: https://...
    chiefns830
    last modified by chiefns830
  • Clarification on XFMR secondary OCPD requirements. 

    When installing a 1300kva Delta 13.8kv primary, 480vac Delta or Wye secondary.  XFMR will have <6% impermanence.  Is it necessary to install a fused disconnect on the secondary of the XFMR with OCPD on th...
    tvogan
    last modified by tvogan