• Fire Sprinkler System at ICE CREAM Factory

    Hi, I have been working for design of fire sprinkler system for ICE cream factory. It consist of (1) Installation at packing hall where the temperature of packing hall is 15degC. (2) Installation at Cold Stora...
    nfpaunilev
    last modified by nfpaunilev
  • fire alarm and signaling code

    hi everyone,  I am new to the field and i need your advice. i couldn't find a rule of addressable fire system in NFPA 72, where does require to install "addressable fire system" and "conventional fire system...
    gk.karkashadze
    last modified by gk.karkashadze
  • NFPA 13R Expert Required

    NFPA 13R Expert Required I have a project that requires an expert in the implementation details NFPA 13R compliant water-based fire sprinkler systems installed in the attics of condominiums and apartments. Complying ...
    drboblewis
    last modified by drboblewis
  • NFPA 10 Form for Mobile / Tablet

    score10
    Active
    2 votes
    I wanted to share this great tool for mobilizing the NFPA eforms: https://docspace.io  You can fill out the NFPA10 forms on your mobile or tablet device. Plus it adds additional functiona...
    japagley
    last modified by japagley
  • All The new buildings in USA requires 10 years non-replaceable smoke alarm?

    All The new buildings in USA requires 10 years non-replaceable smoke alarm?   
    ankasales3
    last modified by ankasales3
  • Fire Hydrant Piping Leak

    we have recently commissioned our fire network consisting of fire hydrants and sprinklers. During the commissioning of fire pumps, it was found that pressure is dropping in the fire hydrant underground piping network ...
    ananthars90
    last modified by ananthars90
  • Combining quick and standard response sprinkler system

    Hello again. Can a quick response sprinkler and a standard response sprinkler be combined in same system?   Thanks George             
    superjetpilot95
    last modified by superjetpilot95
  • Testing and Maintenance of Fire Dampers (not easily accessible)

    Knowing that most fire dampers are installed in areas of the building that are not easily accessible; installed in penetrations of fire rated walls and floors as required by the building code and access to the da...
    pothier.celine
    last modified by pothier.celine
  • Fire Pump replacement

    In my city a hospital equipped with a fire pump has decided to replace the existing pump "voluntarily" because it is approaching it's end of life (their words). The question is when replacing this pump should they be ...
    scott4399
    last modified by scott4399
  • Non-Restorable Fixed Temp Expired Heats

    Does anyone know of a company in the New England area that tests (lab tests) fixed temp non restorable heat detectors that are expired? Never had a customer come back and want this option but here we are .  No r...
    kerrie
    last modified by kerrie
  • fire protection  petroleum coke in warehouse

    Hello I have a shed "warehouse" of petroleum coke (coke pet ) feeds cement kilns, my question is : who what requires NFPA in this sense in terms of protection by deluge system and launch monitor, and what is the ...
    jad.kla
    created by jad.kla
  • 2 fire pump at one time

    Hello friendsdoes NFPA13 or 20 require the installation of two pumps 2500gpm, one electric  and the other diesel plus the jockey, so 3 pumps in the same room.  If yes which Ref and Numbre of NFPA . Tanks##
    jad.kla
    last modified by jad.kla
  • Pressure for hose streame inside and the hydrant outside

    hello fire experts what NFPA13 requires minimum and maximum pressure for hose streame inside and the hydrant outside #
    jad.kla
    last modified by jad.kla
  • Remote fire systems

    Greetings, Does anyone have some really good fire system ideas for remote generation. Imagine that you have 60 locations and getting service in these areas is expensive and sometimes not possible due to weather. ...
    dmaynor
    last modified by dmaynor
  • Welding / Fabrication Work According As As Per NFPA Standard

    Hi Kindly guide me Is any separate code or standard to briefly describe welding, fabrication procedure that show to AHJ or CFPS that welding is proper and as per NFPA. I try to find code from Codefinder but not foun...
    info@emse.pk
    created by info@emse.pk
  • NFPA 72 documentation

    I have an alarm company that is only supplying a list of passed signals as their NFPA 72 servicing documentation. They are saying that I am out of line requiring what is required by NFPA 72 sections 7.5.6 or 7.8.1.2 a...
    jbales
    last modified by jbales
  • LPG- Fire

    LPG Fire can be emulsified with water? how you can justify using a firewater system for LPG handling industries.
    nav822nav
    last modified by nav822nav
  • Can smoke detectors be installed as supervisory in a hotel room?

    Hello,   We have a hotel and we continue to receive several nuisance alarms in some of the rooms. The rooms have smoke detectors and are currently installed to alarm. I know duct detectors can be set to supervis...
    stephenpaulotero
    last modified by stephenpaulotero
  • Silicone RFID Fire Hydrant Bonnet Sleeve

    score3
    Active
    2 votes
    I have a newly patented product to help first responders and municipalities find and upkeep fire hydrants. I was recently awarded a patent by the USPTO for a stretchy Silicone Fire Hydrant Bonnet Sleeve with RFID comm...
    ozzieozburn
    last modified by ozzieozburn
  • NFPA 25: Replacement of a Power Monitor

    Colleagues, hope all of you are well,   According to table 8.6.1 of NFPA 25, in case of replacement of a power monitor, I shall "Perform six operations of the circuit breaker/isolation switch disconnect (cycle t...
    ivan.balashov
    last modified by ivan.balashov