• Remote fire systems

    Greetings, Does anyone have some really good fire system ideas for remote generation. Imagine that you have 60 locations and getting service in these areas is expensive and sometimes not possible due to weather. ...
    dmaynor
    last modified by dmaynor
  • Welding / Fabrication Work According As As Per NFPA Standard

    Hi Kindly guide me Is any separate code or standard to briefly describe welding, fabrication procedure that show to AHJ or CFPS that welding is proper and as per NFPA. I try to find code from Codefinder but not foun...
    info@emse.pk
    created by info@emse.pk
  • NFPA 72 documentation

    I have an alarm company that is only supplying a list of passed signals as their NFPA 72 servicing documentation. They are saying that I am out of line requiring what is required by NFPA 72 sections 7.5.6 or 7.8.1.2 a...
    jbales
    last modified by jbales
  • Flow testing of hydrants and FHC.

    Please mention the standard/s and clauses mentioning the  flow test/ other acceptable tests for 1) fire hydrants 2) hose  cabinets
    ananthars90
    last modified by ananthars90
  • Flow Testing Hydrants Without Pitot

    I read NFPA 291 Section 4.9 about flow testing without a pitot gauge, but I do not understand where to get the variables. Can anyone help explain the process a little better to me?
    loganweaver15
    last modified by loganweaver15
  • Pressure reading for testing new Pumps

      As per NFPA 25 Standard for the Inspection, Testing, and Maintenance of Water-Based Fire Protection Systems, in Chapter 8, the 8.3.2.1.2.1 it states that if readings are above 95% of rated pump pressure, ...
    mazoon.ghalib
    last modified by mazoon.ghalib
  • LPG- Fire

    LPG Fire can be emulsified with water? how you can justify using a firewater system for LPG handling industries.
    nav822nav
    last modified by nav822nav
  • Flushing Flow Rate

    What are the NFPA flushing rates for external (unburied or underground) pipes? I believe that they should be the same flushing flows proposed for underground pipes as contemplated in NFPA 24   Than you,#Flushin...
    dabenitez
    last modified by dabenitez
  • Can smoke detectors be installed as supervisory in a hotel room?

    Hello,   We have a hotel and we continue to receive several nuisance alarms in some of the rooms. The rooms have smoke detectors and are currently installed to alarm. I know duct detectors can be set to supervis...
    stephenpaulotero
    last modified by stephenpaulotero
  • NFPA 13D PEX

    Does  2019 13D 5.2.2.4 mean that PEX is not allowed to be used if a house has an FDC? The local AHJ requires FDC's on single family homes, and I'm wondering if I am allowed to use PEX if the manufacturer gives me...
    mountainfireprotection1
    last modified by mountainfireprotection1
  • Silicone RFID Fire Hydrant Bonnet Sleeve

    score3
    Active
    2 votes
    I have a newly patented product to help first responders and municipalities find and upkeep fire hydrants. I was recently awarded a patent by the USPTO for a stretchy Silicone Fire Hydrant Bonnet Sleeve with RFID comm...
    ozzieozburn
    last modified by ozzieozburn
  • Wireless Fire System Monitoring - The Way To Go?

    How common are wireless fire monitoring systems & what are advantages & disadvantages? We're a townhome community & we've heard some negative stories.
    hoaboardjv
    last modified by hoaboardjv
  • Fire Watch Inspection Frequency

    I am looking for information regarding fire watch frequency.  The policy we currently have in place states that a "fire watch inspection tour will be made...no less than every thirty (30) minutes throughout the a...
    sharris
    created by sharris
  • Leak detection requirements for underground storage tanks.

    Are newly installed underground storage tanks  intended for fire water suppression storage required to go through a leak testing procedure prior to being put into service?
    dhauser
    last modified by dhauser
  • Fire safety Standards, documents or guidelines for Tobacco Industry

    Can anyone please guide me regarding any standard, guidelines or any document that is solely for fire safety regarding tobacco processing industries.?
    saroosh.khan
    created by saroosh.khan
  • Is anyone doing the 5 year hydro-static testing for FDC's according to NFPA 25?

    I'm with an AHJ and we were thinking of enforcing all of the NFPA 5 year inspections. Just looking for thoughts and advice on who out there is testing the FDC's according to 25. Thanks. 
    sgrube
    last modified by sgrube
  • How to prevent a standpipe hose connection from malicious opening?

    I have a NFPA 14 standpipe that I want to prevent from inadvertent/malicious opening of the hose connections. What suggestions do you have?  This is what I have been able to come up with: Put caps on with a spa...
    jzour
    last modified by jzour
  • Fire Detection System

    We want to install fire detection system in the area where HVAC system is already installed. In case, if we install the fire detection system on roof which is above 1.9 m from cool air supply duct the possibility of a...
    syed.bilal
    created by syed.bilal
  • Vortex fixed Sprinkler system Nitrogen bottle Hydro requirements

    Need some clarification on what the hydrostatic retest requirements are for 3 rows of 2500 psi Nitrogen tanks installed in bank for water mist suppression system in an underground fuel vault (not buried, in conditione...
    jyeager
    last modified by jyeager
  • How often do paint booth fire suppression and kitchen hood suppression systems need to be tested  ?

    How often do fire suppression systems in paint booths and kitchen hoods need to be tested.
    kevin.duvall
    last modified by kevin.duvall