• Will NFPA ever develop a code for Fire Instructor PPE specs?

    I have been in the fire service for 14 years and a Fire Instructor for the past 5. I was surprised to learn that there is no NFPA recommendation for INstructor gear. For those who have taught fire, you will know that ...
    johnnoah
    last modified by johnnoah
  • lightning arrestor installation/vapor area

    Greetings,   In our facility, there is loading/unloading rack where thousands of trucks are coming per day to fill hydrocarbon product to their tanker. the rack has canopy with thickness is greater...
    lsh0215
    last modified by lsh0215
  • NFPA 499 & Outdoor Equipment Classifiction

    In NFPA 499 section 6.10 figures for recommended explosive dust classification state in the description that the figures are for indoor area.  Is this implying that for explosive dust classification outdoor locat...
    chenson
    last modified by chenson
  • Hot air welding

    Is hot air welding thermoplastic roofing material considered hot work under NFPA 51b?  
    johncosta
    last modified by johncosta
  • Combustible dust in grain handling and the use of hand held battery operated equipment

    I work as an Industrial Hygienist and I am doing work with a major Grain Handler.  One of the key risks is combustible dust and the question I have found difficult to answer is whether or not it is safe to use no...
    desafety
    last modified by desafety
  • Loading bulk containers inside of buildings?

    Good afternoon,    I've read through NFPA 30 looking for guidance on loading of liquid bulk containers inside of buildings.  NFPA 30 chapter 28.4.1 states that loading facilities for Class I liqui...
    matthew.meservy
    last modified by matthew.meservy
  • Use of NFPA 80A for transformer protection

    Good day,   We are looking into protecting a building from a transformer (power generation facility) that is located within 6 meters from the building. The equipment surrounding the transformer is preventing us f...
    pothier.celine
    last modified by pothier.celine
  • Commercial Propane Leak Detection System

    We are looking for a Propane Leak Detection System to have installed in to our 18,000 SqFt warehouse. We have 40+ Fork Lifts that we store inside at night. We've only been able to locate stand alone plug-in units. T...
    arsenk
    last modified by arsenk
  • Propane System Training and Certification?

    Hello, does anyone know if any training is required for technicians to work on gas pressure regulators that are attached to a propane line for residential use?  I have a pretty big generator at my home in PA (38 ...
    lrj-1
    last modified by lrj-1
  • Abrasive Blast Booth

    What are the requirements for suppression in an abrasive blast booth?
    william.dezern
    last modified by william.dezern
  • Fire protection of oil tanks

    Hello, customer is looking for inert gas based fire suppression system for protecting reservoirs full of petroleum. What kind of inert gas system in accordance with NFPA 2001 would you recommend pls? IG-01, IG-100, IG...
    president
    last modified by president
  • Storage requirements in underground hydroelectric generating plants

    We are researching technical guidance and best practice on the flammable liquid storage requirements in underground hydroelectric generating plants. In typical buildings, storage of flammable liquid is not p...
    pothier.celine
    last modified by pothier.celine
  • Overriding Safeguards

    Per NFPA 79 9.2.4:   9.2.4 Overriding Safeguards. Where it is necessary to temporarily override one or more safeguards, a mode selection device or means capable of being secured (e.g., locked) in the desired mod...
  • Best practices / legislation for design of industrial fire fighting facility

    I am currently in the process of designing an industrial fire fighting facility. I am looking for best practices / codes / legislation that can be used to design such a facilities and let the burns happen in a safe an...
    danfire
    created by danfire
  • DIESEL ENGINE FIRE WATER PUMPS

    Hi all I am planning to put in a Fire water pump in an area where electricity is a bit too far. I intend to put in 2 diesel engine driven fw pumps. One will be standby for other. Both have their own engines. Is there...
    fqureshi65
    last modified by fqureshi65
  • Marking physcially rechargable extinguishers as "Non-Rechargable"

    A.3.4.2 : Some fire extinguishers that are physically rechargeable are marked “Nonrechargeable” and are therefore considered by this standard to be Nonrechargeable (nonrefillable) fire extinguishers. ? Do...
    aaron.j.begunich.ctr
    last modified by aaron.j.begunich.ctr
  • 2112:2012 validity

    Hi Everyone,   Just wanna know if the 2112:2012 edition is still valid now that the 2018 edition has been published.   Thanks in advance!
    naomiuli
    created by naomiuli
  • What is your opinion about: Safety Instrumented Fire & Gas Systems?

    Dear Sirs.- I would like your opinions about Fire and Gas Systems and Safety Instrumented Systems
    guillermov
    last modified by guillermov
  • LPG PUMP ROOM REQUIREMENT FOR PUMPS INSTALLATION

    Hi  Good Morning,   I have a question regarding LPG pump room. Does the LPG Pump room require any shed or a building to install or they can be installed in an open atmosphere?     Please support ...
    nav822nav
    last modified by nav822nav
  • What is preferred elevation of hydrogen gas transmission pipeline?

    A hydrogen gas transmission pipeline (~300 psi) will be constructed just outside my factory fenceline in China, along the plant entrance road .  Is it safer for this line to be installed underground or ...
    daniel.lewis
    created by daniel.lewis