Do you know what to look for during regular maintenance on your furnace? This is one of the biggest investments in your home, and you don’t want to replace it before it’s worn out. Most importantly, modern furnaces have modifications that will require you to fully understand them in case you want to ensure their efficiency. Below is a gas furnace inspection checklist that you can use to ensure that your furnace is working at its best.
Gas Furnace Inspection Checklist - Prevent Fire Hazards
1. Heat Exchanger
You should check your heat exchanger for possible cracks which is not repaired, can result in the emission of toxic gases.
You need to always keep your burners clean. Dirty burners can result in incomplete combustion, and this is extremely treacherous for your furnace. Besides, you don’t want your house to be full of soot. Instead, you want to ensure that you’re taking all the steps needed to improve indoor air quality.
3. Fun Switch
Once you invest in your furnace, you need peace -- and of course no nuisance. Although if you have a faulty fan and check on the switch, you’ll most likely be hearing different sounds coming from your furnace.
4. Pilot and Pilot Assembly
Pilots are also an integral part of your furnace. You need to make sure that you not only clean them, but also adjust them accordingly to prevent experiencing a furnace shutdown.
5. Safety Controls
You also need to inspect your safety controls routinely. Faulty safety controls can result in accidents in your home. Some accidents include home fires that result from heating products used in homes. Heating equipment fires accounted for 15% of reported home fires in 2011-2015, and 19% of home fire deaths. More often than not, 53% of home fire deaths happened when heating equipment was too close to things that could burn.
6. Gas Line
Gas leakages can cause extreme harm to your home, and you need to ensure that your shut off valves are working efficiently. You can notice gas leakages from furnace shut offs.
7. Combustion Air
You also need to keep checking your combustion air to ensure that its openings are working efficiently.
8. Flue Pipe
During your routine maintenance, you need to inspect your flue pipe for either leakages or corrosion.
9. Performance and Temperatures
If you keep data of your furnace temperature and performance, it is easy to know when there is a complication.
If you want to reduce your maintenance costs, then your panels need to be secure. Securing them implies that you don’t let them become loose.
11. Control and Safety
Apart from other failing parts of your furnace, faulty controls can increase your overall operating cost.
Lubricated furnaces will definitely oversee wear and tear very quickly, and can eventually lead to other sorts of furnace damage.
13. Pulleys and Belts
You compressor life depends on your belts and pulleys. Therefore, you’ll need to adjust them and make sure they are not loose on a consistent basis. If your pulleys and belts are loose, your compressor life will be shortened.
14. Air Filter
An efficiently working air filter means that you will spend less on your furnace. However, if you have a faulty air filter, it may not only waste energy, but also shorten your compressor’s life.
15. Amp and Voltage
Voltages and amp can determine the lifespan of your furnace and the amount of money you will spend on operating it. You, therefore, need to ensure that you check and record fan motors, the draw of the bower meter, the condenser and most importantly, the compressor.
Usually, your furnace thermostat needs to be calibrated and checked routinely to prevent failure.
Routine maintenance of your furnace will increase the lifespan of it; but routine maintenance means much more than simply checking it out to see if everything looks okay. Be sure to use this gas furnace inspection checklist,https://www.worlockheatandacphoenix.com/gas-furnace-inspection-checklist/ the next time you’re about to do an inspection to ensure that you check all aspects of your furnace.