The riser was installed 11 feet from the slab edge in lieu of 10 feet per NFPA 13 10.4.3.1 in 1 50,000 Sq. Ft. 3 story high school building. What is the best way to remedy this?
Don't worry about it, one foot is not going to matter
The DSA fire life safety reviewer has taken exception!
What does DSA stand for
Not near the book till tomorrow
but it is allowed.
Remedy call Jack and Hammer
I take it completly covered and cemented??
Get the tape measure out and measure to where ten feet is??
10.4.3.2 does allow more than ten feet.
Retrieving data ...