Is a med-gas 6010 installer certification required in a category 3 where there is only compressed air and vacuum?
Can't seem to find the answer in the NFPA 99 2015 Edition.
Florida Medical Gas Certification Corp.
Hi Mike :
I am going to say yes without prejudice.
Here is what NFPA 99-2015 says:
NFPA 99-2015 reads:
I didn't copy the exceptions as there are too many for this message format.
The exceptions in this section did not mention qualification of installers. So, with no exception the installers are to be qualified for Category 3 systems are the same as Category 1 systems.
Let me know if this helps. Your feedback would be appreciated.
Retrieving data ...